5 kW Complete PV System

20 Panels 315w
3-5K(6) Grid Tie
1 Wire Kit


A complete system with complete specifications and installation instructions. 5 kW system will produce 6kW at peak performance. Ask us more?  An average house requires 15kW or three kits and we will include an extra SSAL INSTKIT and an extra Wire Kit (will produce 18kW at peak out-put).  All systems come with easy instructions and we can help. Check our 20 kW system for more power.

Ratification Of Solar Project Agreements

ratification government application filing and solar agreements carbon credits tax solarwinddepot comm
ratification application filing and solar agreements solarwinddepot comm
Ratification is the official way to confirm something, usually by vote. It is the formal validation of a proposed law. We almost never use the word ratification except to talk about process by which proposed laws, treaties, and agreements are officially recognized.

“The secret of focus of the microscopic, is the secret of self-discovery of the person or of persons within a groups dynamics. You’ll apply the lens looking deeply inside yourselves to discover your personal or groups resources, the lens by which you’ll see and confirm a persons or groups place and what it takes to match those personal or collective resources to the challenges ahead of us.”

Join us in our petition for change to bring about reasonable ratification of law to favour Solar enterprising in Alberta, Canada, at least equal to the rest of Canada and the World. Read More Here … or sign our Petition below.

Change Energy Distribution Policy

Change Energy Distribution Policy

The Solar Wind Depot Ltd. Alberta Solar Energy Plan

Your bill minus all the charges listed top of this page!

Best of the Season 2016 – 2017

points of light around the world you are solar wind depot

Powering The Knowing And The Sharing

We wish you all so very much, all the knowing and sharing powering all we do! We wish you all time and grace with all the company you grave in favor. 

Points of light around the globe you are. 

Power Up in this time of reflection and renewal, enjoy the days and as they change change with them. Name the days for what they will mean for you, name the days for what action you'll take within them, and name all the days for what you really do expect to get out of them! 

We wish you well and all the very best. If you need anything at all just ask. We enjoy the challenge and freely answer all solar queries. 

However you enjoy it, be well and be found in the company of your favors. Merry Christmas and Happy New Year. ~BOD



This unit is an 8 panel 39″ x 65″ array that can easily be installed by 2 people without a crane.

  1. The galvanized screw pile is screwed into the ground using a Bobcat hydraulic post hole drilling attachment.
  2. The 10′ galvanized stack is then bolted and leveled with locator marking pointed south.
  3. The galvanized yoke is then bolted to post.
  4. The lower SS frame is mounted.
  5. The upper SS frame is connected and using a rope pulled into position and bolted.
  6. If using a fixed setup the positioning rods are installed
  7. If using an electronic tracker the linear actuators are installed and electronic controller mounted Panels are installed.
  8. Wires are run and connected.

Send Mail or Contact Us Here


This unit allows for any single phase 120Vac 60Hz or 240Vac 60Hz input to be configured for delivering L1 N L2 240Vac 2 leg 120Vac 120Vac to a transfer switch or Standard North American service entrance panel.

  • It has its own circuit breakers
  • It meets CSA and NEC code requirements
  • It provides a 60 Hz band pass filter that eliminates unwanted spurious signals from entering the service entrance to the house.

It is capable of 5000 Watts and is stackable if more power is required.


This is a 100 Amp 240Vac transfer switch with disconnect for mounting on outside of house below the meter between the meter and service entrance panel.

  • It has a 240Vac line input.
  • a 240Vac inverter input.
  • a solar switch for panels to allow switch-over from grid tie to battery charger when in hybrid inverter mode.
  • a disconnect for line in.
  • a disconnect for inverter in.

This unit allows fire department and or electrical utility agent to disconnect in an emergency from outside the building at the meter.

It exceeds the CSA and NEC code requirements.

System is available in 200Amp service entrance configuration and with meter built in a single unit.